Enable DST on cameras

If the time on your cameras is out of sync due to Daylight Savings Time, follow these steps to enable DST.

B-51 and D-51 Spot AI cameras

1. Access the camera's configuration page and log in
2. Proceed to 'Configuration'
3. Navigate to 'System > System Configuration'
4. Open 'Dst'
5. Click ‘Enable’
6. Set the Start Time and End Time. Note: DST starts the Second Sunday in March and ends the First Sunday in November.
7. Set the DST Bias to 60 mins.
8. Click ‘Save’

T-53, B-53, and D-53 Spot AI cameras

1. Access the camera's configuration page and log in
2. Navigate to 'Setup'
3. In the common box located on the left, click 'Time'
4. Click ‘DST’
5. Click ‘On’
6. Set the Start Time and End Time. Note: DST starts the Second Sunday in March and ends the First Sunday in November.
7. Set the DST Bias to 60 mins.
8. Click ‘Save’

We hope this article was useful to you, please leave us a comment or feedback as it will help us improve our customer support center.